Tel:  +32 56 36 37 40

Fax:  +32 56 36 08 12

www.rassecurity.com

Tel:  +

Fax:  +

www.ssslb.com

Tel:  +

Fax:  +

www.ssslb.com

Tel:  +

Fax:  +

www.ssslb.com

Download Cutsheet BA-71

The GRI 50RS Series is a 1/4″ diameter switch designed for applications where a miniature recessed switch set is required. Only .562 inches in length, the switch is able to be recessed in places where a standard switch is too large. The 50RS series is also widely used in the manufacture of alarm creens.

Note: There is a print link embedded within this post, please visit this post to print it.

• Lifetime Warranty
• Colors: White, Brown or Gray
• Standard 12″ Leads
• Longer Leads, Zip Cord or Jacketed Cable on Request
• UL and ULC Approved
• Available in Open Loop, Closed Loop and SPDT
• Hermetically Sealed
• Ideal for Thin Framed Doors and Windows
• Ideal in Jobs for which a Regular Size Switch is Too Long
• Plated Contacts Resist Sticking or Freezing
• Switches or Magnets are Available Separately
• Standard Gap 1/4″+
• Wide Gap 1/2″+
• Extra Wide Gap 3/4″+

Download PDF Cutsheet BA-82

The G.R.I. recessed “shortie” switch set is designed for applications where a 3/8″ press to fit set is needed but space limitations will not allow for a full length set to be installed. With the 5/8″ 20RS-12, or the .930″ 20RS-T, the installer is able to protect openings that otherwise would have to be secured with more visible surface mount configurations. Available in regular and extra wide gaps, the 20RS series provides an easy answer to the difficult, high dollar window problems every installer encounters.

• Lifetime Warranty
• Colors: White, Brown, Gray
• UL and ULC Approved
• Available in Open Loop, Closed Loop and SPDT
• 3/8″ Diameter, Press To Fit
• Standard Lead Length 12″ or Terminal Block
• Longer Leads, Zip Cord or Jacketed Cable on Request
• Ideal for Thin Framed Doors & Windows
• Built-in Resistors & Diodes Available on Request
• Switches or Magnets Available Separately
• Standard Gap 3/4″+
• Extra Wide Gap 1″+

20RS-12
5/8″ Length

20RS-T
.930″ Length

Download Cutsheet BA-86

The 50R and 50RF Series are 1/4″ diameter switch sets designed for applications where a small diameter recessed switch set is required. This makes the set desirable in residential installations where no sign of an alarm system should be seen or where there is not room to install a larger diameter switch set. The 50R-12 is a straight cylindrical set for flush or counter sunk installations. The 50RF-12 set is flanged to prevent inadvertent pulling of the switch into the wall.

• Lifetime Warranty
• Colors: White, Brown or Gray
• UL and ULC Approved
• Available in Closed Loop, Open Loop or SPDT
• Flange Available
• Standard 12″ Leads
• Longer Leads or Zip Cord Available on Request
• Built-in E.O.L Resistors and Diodes Available on Request
• Switches or Magnets are Available Separately
• Supervisory Loops Available
• Standard Gap 1/2″+
• Wide Gap 1″+

50RF-12
1/4″ Recessed Switch Set

Download Cutsheet BA-65

The 20F and 20 OF Series are a flush mount design that enable the installer to combine the security of a screw mount flanged switch with the concealment of a press fit switch. They have been used in hollow aluminum frames where inadequate material depth will not reliably retain a press fit switch and in holes that have been drilled or have somehow become slightly oversized. They are available in 1/2″ to 1 1/2″ gap. Mounting hardware is provided.

• Lifetime Warranty
• Colors: White, Brown, Gray or Black
• UL and ULC Approved
• Available in Closed Loop, Open Loop, SPDT and DPDT
• Standard 12″ Leads
• Longer Leads, Zip Cord or Jacketed Cable on Request
• Built-in E.O.L. Resistors and Diodes Available on Request
• Switches or Magnets are Available Separately
• Round or Oval Flange Available
• Standard Gap 1/2″+
• Wide Gap 1″+
• Extra Wide Gap 1 1/2″+
• Supervisory Loops Available

20 OF-12

Download Cutsheet BA-59

The 120T/4473 requires that a 3/4″ hole be drilled for the switch and 3/8″ hole for the magnet. The 3/4″ switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would be easy to pull the switch, extend the extra wire and access the original connections.

Installation is further enhanced by using a smaller 3/8″ diameter magnet to avoid the need to center a larger hole in a 1″ to 1 1/2″ thick door or window. This will allow you to offset the magnet should it be required.

The 120T/4473 switch set was developed for and should only be used in openings with wooden or aluminum frames.

• Lifetime Warranty
• Available in closed loop, open loop and SPDT
• Wire leads or terminal blocks
• 12″ leads
• Available with new rare earth Magnets
• Longer Leads, Zip Cords, or Jacketed Cable on Request
• Built-in Resistors and Diodes Available on Request
• Switches or Magnets are Available Separately
• Supervisory Loops Available

120T-12

4473

Download Cutsheet BA-159

Larger than 3/8″ but smaller than 3/4″, G.R.I introduces their newest innovative switch design, the one-half inch diameter, flush mount, 150-12. This new design is in response to requests from our customers for a switch that would give them additional “working room” for extra wire, E.O.L. resistors, etc., yet would more readily install in the increasingly popular hollow core windows.

• Designed for Hollow Core Doors & Windows

• Hole Size Allows for Extra Wire, etc.

• Up to One Inch Standard Gap

• Installs Firmly in Wood, Vinyl and Aluminum

• Recessed Magnetic Contact

• Press or Snap Fit

• 12″ #22AWG Leads

• Longer Leads, Zip Cord or Jacketed Cable Upon Request

• Hermetically Sealed

• Plated Contacts Resist Sticking or Freezing

• Built-in E.O.L. Resistors and Diodes Upon Request

• Switches and Magnets Available Separately

• Colors: White or Brown

• Lifetime Warranty

150-12