Recessed Switches

Download Cutsheet BA-71 The GRI 50RS Series is a 1/4″ diameter switch designed for applications where a miniature recessed switch set is required. Only .562 inches in length, the switch is able to be recessed in places where a standard switch is too large. The 50RS series is also widely used in the manufacture of […]

Download PDF Cutsheet BA-82 The G.R.I. recessed “shortie” switch set is designed for applications where a 3/8″ press to fit set is needed but space limitations will not allow for a full length set to be installed. With the 5/8″ 20RS-12, or the .930″ 20RS-T, the installer is able to protect openings that otherwise would […]

Download Cutsheet BA-86 The 50R and 50RF Series are 1/4″ diameter switch sets designed for applications where a small diameter recessed switch set is required. This makes the set desirable in residential installations where no sign of an alarm system should be seen or where there is not room to install a larger diameter switch […]

Download Cutsheet BA-65 The 20F and 20 OF Series are a flush mount design that enable the installer to combine the security of a screw mount flanged switch with the concealment of a press fit switch. They have been used in hollow aluminum frames where inadequate material depth will not reliably retain a press fit […]

Download Cutsheet BA-59 The 120T/4473 requires that a 3/4″ hole be drilled for the switch and 3/8″ hole for the magnet. The 3/4″ switch mounting is desirable since the extra wire and connections can be more easily inserted into the larger hole for concealment. Also, should the need arise for testing or replacement, it would […]

Download Cutsheet BA-159 Larger than 3/8″ but smaller than 3/4″, G.R.I introduces their newest innovative switch design, the one-half inch diameter, flush mount, 150-12. This new design is in response to requests from our customers for a switch that would give them additional “working room” for extra wire, E.O.L. resistors, etc., yet would more readily […]

Download Cutsheet BA-226 Larger than 3/8” but smaller than 3/4”, the GRI 150RS Series is a one-half inch diameter, flush mount contact. This  1/2” diameter design allows additional “working room” for extra wire, E.O.L. resistors, etc. Manufactured from a  special polyvinyl material, the unique collar design will “press-fit” into hollow core aluminum or vinyl clad […]

Download Cutsheet BA-90 The GRI 180 Series is the industry standard 3/4″ diameter recessed steel door switch set with 12″ leads. The 184 Series is a 1″ diameter switch set.

Download Cutsheet BA-200  

Download Cutsheet BA-65 The 20F and 20 OF Series are a flush mount design that enable the installer to combine the security of a screw mount flanged switch with the concealment of a press fit switch. They have been used in hollow aluminum frames where inadequate material depth will not reliably retain a press fit […]

Download Cutsheet BA-125

Download Cutsheet BA-112